Tormek T-8 Wet Stone Grinder 250mm 200W with Free Rotating Base

Buy a Tormek T-8 Original and Get a FREE RB-180 Rotating Base

Made in Sweden, Tormek is fully focused on sharpening exporting to over 35 countries world-wide. Appreciated by cabinet makers, woodworkers, woodturners, outdoor enthusiasts as well as professional chefs, industrial kitchens and households. The Tormek sharpening system is simply the best and fastest sharpening system available.

Tormek Wetstone Grinder 250mm T-8 Original

TORMEK T-8 maximises precise sharpening thanks to the revolutionary fully cast housing that guarantees minimal play for the Universal support arm. This provides the best possible conditions for you to be successful with your sharpening. Tormeks unique drive system is efficient and holds a constant speed even under full load. The Tormek Original Grindstone sharpens all qualities of steel, including HSS. The machine features several additional details including instant stone locking with EzyLock, water trough with lift and a removable magnet scraper for efficient cleansing. There is also a massive range of sharpening accessories available to sharpen tools of any kind.

Features & benefits

• The new Tormek T-8 has a fully cast housing supporting the Universal arm guaranteeing minimal play that improves the control of the sharpening and increases the accuracy of the final results
• With an updated design and upgraded features, the new T-8 provides you the with best possible conditions for a successful sharpening every time
• The Advanced Water Trough has been further improved with a screw lift for an easier fitting and a magnetic scraper for easy cleaning
• For long tools that drip water over the edge of the lip (like chefs knives and planer blades), you can add the water chute. Set the widest edge of the chute onto the tab in the middle of the lip of the trough and the water chute will direct the water back into the trough from even the longest tools
• The removable scraper incorporates a strong magnet that attracts the steel particles ground from the tools being sharpened, this keeps your stone clean and cutting more freely
• Hard-wearing Stainless-Steel shaft with EzyLock nut for simple removal of wheel
• The Leather Honing Wheel gives that final polish of the edge, giving that ultra-sharp edge
• Can be used with more than ten different jigs to sharpen most tools in the workshop and house
• The Tormek is light weight so it can be easily moved and stored when not in use.

Whats in the box

• Tormek T8 with leather strop and water trough
• SE-77 Square Edge Jig
• TT-50 Truing and Dressing Tool
• SP-650 Stone Grader
• WM-200 Angle Master
• PA-70 Honing Compound
• HB-10 Handbook
• Tormek DVD

FREE Tormek Wetstone Grinder Rotating Base

You can use the RB-180 Rotating Base to easily rotate your machine 180 and then lock it in place. This allows you to alternate between sharpening and honing or alternate between sharpening edge trailing and edge leading in just a few seconds. With next too no effort.

The RB-180 Rotating Base

• Rotate your machine 180
• More ergonomic sharpening
• Saves space you don’t need to be able to walk around the machine
• Fits the Tormek T-8, Tormek T-4 and some older models

Easily switch between sharpening and honing

Some tools are best sharpened when the stone is rotating into the edge. Other tools are best sharpened with the stone rotating away from the edge. With Tormek’s rotating base, you can easily rotate your machine 180 and adapt the direction of rotation to your needs.

The rotating base also makes it easy to switch between sharpening and honing. Always hone with the honing wheel rotating away from the edge (edge trailing), otherwise there’s a risk of the tool cutting into the honing wheel and damaging it.

Better ergonomics

Tormek has been very careful to make the RB-180 Rotating Base as thin as possible so it doesn’t raise the machine and change the sharpening position. You can easily rotate your Tormek without heavy lifting or spilling water. All for the best sharpening experience.

The plastics in the RB-180 Rotating Base are optimised to provide low friction and high stability. What’s more, the rotating base rests on rubber feet that absorb any vibrations and keep it steady while you sharpen your tools.

The RB-180 Rotating Base fits the Tormek T-8, Tormek T-4, Tormek T-7, and Tormek T-3, as well as models 2000, 1200, SA-250, and N-1500.

Who is Tormek

Well-grounded in the Swedish tradition of advanced innovation, functionality and quality, Tormek has developed a unique sharpening system that has come to set a standard in modern edge tool sharpening around the globe.

Specifications