Heavy-duty, precision milled Miter Track Bolts
While most jigs are produced using t-track and can be fixed in place using the t-track bolts, nuts and knobs, there is a growing need to fit jigs and accessories in to mitre track slots. Up until now this could only be achieved using the TTN-01 mitre track nuts which meant that the corresponding bolt had to be exactly the correct length and also made it more difficult to quickly tighten as the only purchase was a bolt-head.
Mitre Track Bolt & Nut 57mm Long Each
Now available is a bolt with an over-size head that fits perfectly into a 3/4in t-mitre slot commonly found on most table saws, router tables and also is the same profile as the aluminium mitre track that is available separately to be installed in home-made tables. It measures 57mm long and has an M8 thread. It comes with the washer and three-point star knob as a complete set.
Sold individually so you can buy as many or little as you need.
Shown here in use clamping the RTFBH horizontal featherboard as an example of use.
Unconditional Satisfaction Guarantee
