The DrillPump750 is designed to work with most electrical drills with a maximum speed of 2,800 RPM. This water transfer pump is ideal for draining small ponds, fish tanks, small pools or even a flooded basement. The hose connection is 3/4 and uses any standard garden hose. The unit pumps up to 750 gallons per hour and is self-priming up to 12 feet. The 3/8 shank on this unit fits all common chucks for most drills.
DrillPump750 Features:
- Pumps up to750 (3000litres) gallons per hour
- Self-priming up to12 feet
- 3/8 shank on this unit fits all common chucks
- 3/4 hose connection, for use with a standard garden hose
Tips & Tricks:
- The power drill may only be operated in clockwise rotation, never run DrillPump in reverse
- DrillPumpwill not turn by hand, this must be chucked to the drill.
- DrillPumpmust be mounted for proper usage, do not hold in hand.
- After every use apply a small amount of silicone grease. To apply, remove the black housing screws and cover, and put a bit of grease on the housing where the rubber fan blades touch, then reassemble. Any spray lubricants, such as WD-40, are not recommended, as they do not provide sufficient lubrication for this product and can cause damage to the internals of the pump.
- Do not get the drill wet, or use the drill pump with flammable liquids.
- The direction of flow is indicated by an arrow on the housing.
- The delivery rate can be regulated by the speed of the power drill.
Unconditional Satisfaction Guarantee
