50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.Its so simple, chisel in and sharpen Plane blade in and sharpen. No set-up time, no complicated attachments, no experience needed! Place the mat and FastTrack system down on the bench and start sharpening.
The FastTrack system is just at home on-site as in the workshop. From the complete beginner to the most discerning of professional, the FastTrack Mk2 will deliver the perfect sharpening angle for an excellent edge again and again.
The FASTTRACK Precision Sharpening System is a unique solution that holds the blade to be sharpened stationary and its angle constant while a diamond stone is guided across the cutting edge (at a 90 angle to the tools normal cutting direction) at either 25, 27.5, 30 or 32.5, depending on your application, making the bevel flat and the edge true, lasting, and requiring only minimal maintenance unless chipped or neglected.
The Preparation and Finishing Diamond stones allow you can start low to gain a super fine edge that makes a cutting tool a pleasure to use. The instructions provided will have you putting a razor edge on your chisels and plane irons within a few minutes of opening the package.
The newly re-designed solid Aluminium diamond stone holding carriage doubles the number of sharpening angles than the original. This in turn doubles the life of your chisels and plane blades by allowing over 20 chisel re-sharpens between primary re-grinds. The angles are coded 1, 2, 3 and 4 making it simple to move from one sharpening angle to the next.
The most important development is the Centre It clip that re-locates a chisel in the middle of the tool bed.This reduces the pressure needed to hold the chisel during sharpening; but it also prevents the carriage coming off the end of the base.It increases the length of the sharpening stroke, making the sharpening process quicker.
The new carriage is much more comfortable to use with curved ergonomic handle ends to more naturally fit the hand. Especially noticeable after an ALL chisel honing session when you could be using the FASTTRACK for a 30-minute set.
