50% OFF! Hot items selling fast—Grab them before they're gone!
Unconditional Satisfaction GuaranteeNo Shipping Fees Above 302 Months to Decide. Returns Simplified.These dyes are specially for use under Shellawax, Shellawax Cream, Aussie Oil and Glow but can be used under most othernon water-basedsurface coatingsincluding: Danish oil, polyurethane, nitrocellulose lacquer, varnish, shellac, etc.
Because the dyes are concentrated they can be diluted up to 10 times their volume in water and still have extremely strong dying capabilities. It is also possible to obtain very subtle pastel shades by adding full strength dye to 100 or even 1,000 times its volume of water.
The dyes are all made from colourings approved for use in kindergartens and foodstuffs and are therefore NON-TOXIC making them safe for use on bowls, food utensils, children’s toys, babies rattles, etc.
Included colours:
Preparation
Before you use Water Dye it is advisable to put in some fine preparation work with abrasive paper. On most work it is best to use the following grit papers: 180, 240, 320 & 400. On pens and small objects that will be under close scrutiny or continually handled etc. use 600, 800 & 1200 grit also.
Before using these dyes under water based polyurethane or any other water based finish it would be wise to try a test piece. It is possible that the dye might bleed out into the finish.If you find the colour bleeds it can be sealed in with a coat of our Sanding Sealer prior to the application of any water based finish.
